Eachine Cinecan 4K + Crazybee 3.0

Eachine is jumping in the 4K camera but in a whoop ! Eachine Cinecan will be the first cinewhoop with a caddx tarsier 4k.

For that they have use a wheelbase of 85mm. It was necessary to flight correctly a whoop with a weight of 66g. Moreover they are using the new HappyModel 1103 7000kv that support 2-4S. I said 2-4S ? Yes it is not a joke, so you are wondering which FC they will use ? And here we go: the Crazybee F4 pro V3.0.

This new AIO board will support up to 10A and 12A in burst, so it will be the same as the new BetaFPV/Geprc boards.

The VTX will support 25/200mw which is good and classic now with eachine products.

The price ? 195$. It is very expensive now for a whoop but the camera itself is around 90$ …



  • Wheelbase: 85mm
  • Size: 115mm115mm55mm
  • Weight: 66g(without battery)
  • Weight:91g(with Original 3s 300mah Lipo battery)


  • (Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
  • (Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
  • (No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 2-4S battery input (DC 7-17V)
  • Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
  • Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
  • No RX version need to add external Receiver
  • Built-in Betaflight OSD(SPI Control)
  • Built-in Current meter Max 70A
  • Current meter scale set to 470
  • Built-in 5V 1A BEC
  • Built-in voltage detection


  • Mode: EX1103 KV7000
  • Configuration:9N12P
  • Stator Diamter:11mm
  • Stator Length:3mm
  • Shaft Diameter:Φ1.5mm
  • Motor Dimension(Dia.Len):Φ13.5mm15.5mm
  • Weight(g):3.7g
  • No.of Cells(Lipo):2S-4S


  • MCU upgraded to EFM8BB21
  • Power supply: 2-4S LiPo/LiPo HV (7v/17v)
  • Current: 10A continuous peak 12A (5 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: F_H_40_REV16_5.HEX
  • Default protocol: DSHOT600


  • Output power: 25~200mw switchable
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Antenna: RG178 antenna
  • Frequency: 5.8GHz 5bands 40 channels with Race band
  • Smartaudio ready
  • Weight: 3g

Camera Caddx Tarsier

  • Image sensor: Sony sensor 12M, 1/1.8inch, 1/2.9inch
  • Horizontal: 1200TVL
  • TV system: NTSC/PAL changeable
  • Video Resolution: 4K/30FPS 16:9
  • 2.7K/60FPS 4:3
  • 1440P/60FPS,30FPS 4:3
  • 1080P/90FPS,60FPS,30FPS 16:9
  • 720P/120FPS 16:9
  • Power Input: DC 5-12V
  • FOV: 4K F2.8, 150°(16:9) 165°(4:3)
  • Weight:18g
  • Dimension: Camera 19x20mm / DVR 29x29mm
  • Lens: Dual Lens F2.8/12Mega
  • Audio: Dual Digital MIC
  • CPU: DUAL Core dual system

Categories: News

Tagged as: , , ,

Leave a Reply