This page is dedicated to build the best freestyle/race toothpick. So you will find some build examples and ONLY the best parts.

I try to find the best parts everywhere, by testing them and by looking feedbacks from people.

You will be able to find more parts (and details for each part, like the prices, comparisons etc) for toothpick on WhichFPVKwad !

Frame

110X motors

Spedix or Skystars motor

You will be able to read my review of these motors HERE.

Kabab Hyperlite (1S)

AMAX

RCX

APEX SONIC

HappyModel

BetaFPV

120X motors

130X motors

FC

VTX

Propellers

Camera

HD Camera

Canopy

LIPO

You should go to this page to have the best LIPO.

Builds

Tip & tricks

Lipo Holder

I see many people use a strap to hold the lipo, or elastic. But I think we have good TPU option to hold correctly the LIPO.

I did some TPU LIPO Holder because I think elastics are not durable and strong enough. Moreover straps doesn’t fit this kind of build. But a simple TPU LIPO Holder will maintain perfectly your 1S/2S/3S LIPO.

LIPO Holder

You can get them on thingiverse.

I suggest to add also this thing in your build to hold more the LIPO:
https://www.thingiverse.com/thing:3631491

LIPO Holder

Wire too short ?

You have a high chance if you are doing a toothpick that the wire of your motors will be too short. For that RaceWire or ThugWire will be important:

UR65/UK65 reboot

DragonFly 1S

For example if you got a 1S brushless whoop (i.e: UR65/UK65/US65) that you would like to switch. You can swap directly your FC + VTX Camera in the canopy and the motors.

The final build will be 27g and 36g with an 1S LIPO (300mah) (in this photo it is with 0802 motors, so the weight with 06XX should be a little bit less):

DragonFly 1S

It is clearly not the same quad that you will have, much more fun and more long flights compared to the existing build. You can really use it to have some fun for freestyle:

Kabab TP3

2 Comments

Leave a Reply